DP40k High Voltage Differential Probe

See more Differential Voltage probes

The DP40k differential voltage probes are an important accessory for any application involved in power electronics and high voltage systems. These probes allow isolated and floating measurments with any oscilloscope or data recorder, allowing the oscilloscope to remain grounded. Using a DP40k Differential probe, differential and floating (isolated) measurements can be made on a variety of ac power systems like 460V/230V/110V ac input power supplies, chopped and switching power supplies, thyristor controllers, variable speed motor drives (PWM signals), motor inrush current and measurement across current shunts. The isolated input is made via two 4mm/banana safety sockets. The BNC output allows easy connection to an oscilloscope or DAQ. The DP isolation probes are powered from a battery or power supply.

DP40k datasheet

DP40K Differential Voltage Probe Features:

High voltage differential probe
Max. Input Voltage: +/-20kV DC or 40kV p-p or AC 14kV rms
Bandwidth: DC-20MHz
Input Impedance 100M ohm and 1pF
x500 or x5000 Attenuator
Test printer output
Max to ground volage: 10kV CATIII
Output Impedance 50ohm
Used for isolation of oscilloscopes and data loggers
Suitable for power electronic systems and electric car EV power systems
Allows safe isolated floating measurements
Prevents ground loops improves accuracy

DP40k Differential Probe Specifications

Differential Voltage DC + AC Peak:

40kV

Bandwidth (50ohm load -3dB):

20MHz

Common Mode Voltage DC + AC peak:

40kV

Common Mode Voltage RMS CATII / CATIII:

14kVrms

To Ground Maximum Voltage:

10kV CATIII

Attentuation (Switchable):

x500, x5000

Input R (Each Input):

50Mohm >2%

Input C (Each Input):

<2pF

Maximum Operation Voltage (DC + AC peak):

≤4kV at x500
≤40kV at x5000

Common Mode Rejection Ratio (CMRR):

60Hz: 10000:1
100Hz: >1000:1
1MHz: >300:1

Noise (Into 50 ohm Load):

≤1.0m Vrms

Input Impedance (Between Input):

100Mohm and 1pF

Accuracy (at 20-30 degrees Celsius 70%RH after 20 minutes):

≤ +/-2%

Maximum output Voltage:

8V p-p

Power Source:

External 9V DC Adaptor

Other:

Over Range Indication

DP40k Datasheet
CE marked