Model PA2640 Three Phase Power Analyzer
Multi-Channel Power Analyzer

 Powertek
 UK Tel: +44 1788 519911
 US Tel: +1 631 615 6279
 Email : info@powertekus.com
 Email : info@powertekuk.com

return to homepage | info@powertekuk.com | contact us
 



Click image for larger view

 

 PA2640 Datasheet pdf

PA2640 User Manual pdf











The PA2640 is a three phase power analyzer, additionally it is three single phase power analyzers in a single chassis with a single user interface.  The PA2640 may have up to 4 channels installed, which may be any combination of channel cards and with any combination of available current input options.  Multiple PA2640 can be Ethernet connected to make simultaneous multi channel measurements, useful where power analyzer measurements are needed in multiple locations,  where close proximity to the load is required.

Channels may be individually configured, in effect as 3 virtual power analyzers.

Each PA2640 channel can be independently configured for 1ph, 2ph, 3ph 3W, 3ph 4W, multi-channel wiring configurations, signal filtering, default measurement coupling, display results smoothing and efficiency grouping.  Voltage and current input channels may be optionally synchronized to each other.

Product Features:

  • PA2640 has MU option (Multi-Unit Option) which allows the connections of up to 50 units, useful to perform synchronous  Efficiency Measurements on Three Phase Input / Three Phase Output power conversion devices

  • Offers 1-4 simultaneous channels - all measuring Vrms, Vpk, Arms, Apk, Acf, A inrush, PF, W, VA, VAr, THD, THD+N,  V Harmonics, A Harmonics

  • Allows input/output efficiency and power loss...for example testing variable speed drives, electric lighting and power supplies

  • Ideal for Avionics

  • It is accurate with waveform distortion (accurate with non sinusoidal waveshapes)

  • DC-1MHz bandwidth

  • 0.03% basic accuracy

  • Color display with Graphs/Bargraphs/Plots/Data logging

  • PC software available



General Specifications
AC and DC Voltage 0.03%
Current 0.03%
Power 0.05%
Power Factor 0.01
Harmonic amplitude 0.03%
Phase 0.1
For full accuracy performance and graphs refer to PA2640 Datasheet pdf
Power Supply
Line Power Installation Category II; 85-264Vrms, 45 to 65Hz, 40VA max
Internally fused with a non-user serviceable fuse
Environmental
Storage Environment -20C to 75C (-4F to 167F) (non-condensing)
Operating Environment 0 to 40C (32F to 104F), <85% RH (non-condensing), Pollution Degree 2
Operating Altitude 0 to 2000m (6560ft) ASL
Input Isolation
Valid for any V terminal to PA2640 chassis ground; any A terminal to PA2640 chassis ground; and between V and A terminal
Impedance >1GΩ <30pF
Max Voltage 4500Vpk max without damage
2500Vrms for <1s without damage
1000Vrms max continuous rated working voltage (CAT I/II)
600Vrms max continuous rated working voltage (CAT I/III)
300Vrms max continuous rated working voltage (CAT IV)
Dimensions
Nominal Dimensions 137mmH x 248mmW x 248mmD (5.4" x 9.75" x 11.2") with feet not extended
Nominal Weight 3.2 kg (7lb) net, 5kg (11lb) shipping


PA2640 power analyzer Rear Panel


Click to view larger image


PA2640 power analyzer screenshot of Labview with MU option


Click to view larger image

Click here for power analyzer / wattmeter / power meter applications

Read about wattmeters (power meters)

Read about AC power


PA2640 datasheet pdf

PA2640 User Manual pdf

CE marked


If you have any queries regarding the PA2640 power analyzer or require specifications outside our standard ranges please do not hesitate to contact us.

Return to Homepage