PA2801, PA2802, Power analyzer, Single Phase Power Analyzers

PA2801/PA2802 Datasheet pdf

PA2801/PA2802 User Manual pdf

PA2801/PA2802 Display Screenshots

With an extended measurement range from micro-amps to hundreds of amps and milli-volts to kilovolts, the Powertek PA2801 and PA2802 are ideal power analyzers for appliance testing, standby power or Energy Star conformance testing. High speed digitization of voltage and current allows accurate power analysis of both clean and distorted power signals. The graphical display includes numeric results, voltage and current waveform plots along with settings. Measurements can be displayed or read via the communication ports; RS-232, GPIB, USB, and Ethernet, or sent directly at full resolution to a USB printer.

Power Analyzer Features

Accurate with all AC/DC waveform types
High performance-to-cost ratio
Measures, W, VA, VAr, V, A, PF crest factors and harmonics
Base accuracy <0.08%. Current and voltage accuracies specified to less than 1mArms and 1Vrms respectively (<0.2%)
2000Vpk and 150Apk measurable internally (external current probe capable)
Integrated line switch and inrush waveforms
Graphics display shows numerical results, waveforms, bar graphs, startup & history charts with zoom & scroll features
Wiring loss and voltage burden compensation
Harmonic Analysis
DC charge and discharge measurements
Frequency Range: DC and 20mHz – 200kHz
Communications ports include USB, GPIB, and RS-232 standard, plus optional Ethernet*
USB Flash drive support for data logging*
Provides PASS/FAIL tests to user limits*

*Planned features coming soon

PA2801 PA2802 power analyzer rear panel input connection and interfaces

MEASUREMENT FUNCTION	PA2801/PA2802
Measurement Bandwidth	Range	DC, 0.02Hz to 200kHz

VOLTS Vrms Refer performance graphs operation manual	Display Resolution	5 digit
	Measurement Range	700mVrms to 850Vrms (2000Vpk)
	Measurement Range	(200mVrms with display blanking off)
	Vpeak Ranges	850V (2000Vpk), 450V (675Vpk), 135V (200Vpk), 50V (80Vpk), 20V (30Vpk)
	Max input volts	2000Vpk
	Accuracy	0.08% Reading + 0.1% Range 0.04%/kHz
	Accuracy	DC 0.2% Reading +0.2% Range + 10mV
	Common Mode	90dB
	Input Impedance	1Mohm 10pF

Current Arms Refer performance graphs operation manual	Display Resolution	5 digit
	Measurement Range	0.01Arms to 30Arms (150Apk)
	Measurement Range	Transducer (Ext Shunt) input 2mVpk to 15V (35Vpk). Max input 70Vrms
	Amps Ranges	65A (150Apk), 20A (50Apk), 6.5A (15Apk), 2A (5Apk), 0.65A (1.5Apk), 300mA (800mApk), 100mA (250mApk), 30mA (80mApk), 10mA (25mApk)
	Max input amps	30Arms continuous 150Apk
	Accuracy	0.09% Reading + 0.1% Range 0.05%/kHz
	Accuracy	DC 0.2% Reading + 0.2% Range
	Common Mode	90db
	Input impedance	0.015 Ohm - 650mA-65A 0.3ohm - 10mA-300A
Power active power watts	Accuracy	0.1% Reading + 0.1% Range
VA apparent power	Accuracy	0.1% Reading + 0.1% Range
VAR reactive power	Accuracy	0.1% Reading + 0.1% Range

General Specifications
Interfaces	Standard	USB, GPIB, and RS-232 standard
Interfaces	Optional	Ethernet with RS232/Ethernet adapter
Environment	Operating Temperature	0° to +55° C
	Storage Temperature	-20°C to +70°C
	Humidity	10% to 90% RH non-condensing
Dielectric Strength	Inputs to case	2kV AC 50/60Hz for 1 minute
Dielectric Strength	AC line input to case	2kV AC 50/60Hz for 1 minute
Power	AC line input voltage	90V to 264V
	AC line input frequency	45Hz to 450Hz
	AC line input fuse	20mm 1AT
	Power Consumption	14W/28VA
Mechanical	Weight	7.5lbs (3.4kg)
Mechanical	Dimensions (W x H x D)	13.8in x 4.7in x 9.5in (35.05cm x 11.94cm x 24.13cm)

Models PA2801 and PA2802 WattmetersSingle Phase Power Analyzers, 1 or 2 channels

Power Analyzer Features

Models PA2801 and PA2802 Wattmeters
Single Phase Power Analyzers, 1 or 2 channels