Electrical power measurement and analysis for power electronic applications
Three Phase Power meter - Three Phase Wattmeter - Three Phase Power analyzer products

Powertek
UK Tel: +44 1788 519911
US Tel: +1 631 744 0294
Email : info@powertekuk.com

When power system voltage and current waveforms are distorted, careful selection of the measurement system is necessary.  The three phase ISW8300 power watt meter is designed to operate in this environments, typically where ac loads are non-linear i.e. the voltage and current waveforms are non-sinusoidal.    The ISW8300 can analyze % efficiency, the user can quickly collect data over the USB/RS232 interface.   Detailed analysis of the load behaviour becomes simple with these easy to use power measurement instruments.   A range of current transformers and current clamps allows measurement of almost any current.

ISW8300 3 Phase Power Meter / Watt Meter
Use for ac motors, transformers, switching power supplies, UPS input or output measurement

Click here for ISW8300 data sheet

ISW8300 Three phase power meter features

• Measures Active, Apparent & Reactive Power, Power factor, CosØ, voltage rms, current rms, three phase voltage and three phase current
• Operates with three phase balanced, unbalanced loads and distorted waveforms
• 500Vrms,  15Arms Dc-1kHz manual or autoranging protected inputs
• Isolated inputs
• Typical accuracy 0.2% reading + 0.2% range
• Can be used with current transformers
• User can enter current transformer scaling factors
• Indicates power factor correction capacitors
• RS232 or USB Programmable as standard
• Includes PC software to display and store measurements
• 230Vac or 110Vac 50/60 Hz power input