Watt meter, wattmeter, three phase, Power analyser, Powertek

Scroll down to see our full range of three phase power analysers, power meters and watt meters. Three phase power meters / watt meter are a necessity when several electrical measurements are to be recorded during testing, using just one set of input connections. Typically, three phase power meters are important when accurate watts measurement is necessary for certification and traceability. In addition to power measurement (watts), reactive power (VAr), apparent power (VA), voltage rms, current rms, power factor, can all be viewed with ease. All Powertek power meter / wattmeters simply connect between the ac supply and the load, various current transformer and shunt options allow measurement with any level of current amplitude. Typical three phase watt meter applications include appliance testing like generators, electric stoves, heating, air conditioning, pumps, fans, electronic lighting and motor controllers . All our power meters are equipped with safety terminals (4mm/banana) along with optional "breakout" boxes and clamp probes for fast and safe measurement.

PA106A Three Phase Watt Meter Power Analyser			Handheld Three Phase PX120 Wattmeter Rugged Portable Electrical Watt meter
Get PA106A data sheet		Get PX Data sheet
PA106A Features	PX110 and PX120 Features
Accurate with all waveshapes Suitable for PWM frequency inverter driver Large and bright display for up 40 measurement values Scope function, Bar Charts, Harmonics 1-99 DC-1MHz, 1.5 mA-40 A, 0.3 V-1000 V autoranging protected inputs 0.1 % and 0.05 % accuracy options IEEE-488, RS232, Analog outputs / inputs Windows Operating Software Measures 3 phase totals for Watts, VA VAr, Power factor, Vrms, Vpk, Arms, Apk and freq - for unbalanced loads Use for DC, single and three phase systems Easy connection to load under test Current probe input for external current probe / clamp current transformers Optional wideband zero phase shift current probes 120Vac or 230Vac powered	DC or AC true rms Ranges 0.5V to 600V, 10mA-2A and 2A-10A Watt range 0.2W to 6kW (can be expanded) DC to 1kHz Basic accuracy Volts 0.5%, Amps 0.7%, Watts 1.5% Networks: balanced single-phase (PX 110) or three-phase (PX 120) Voltage (V), current (A), active (W), reactive (VAr), apparent (VA) powers and power factor (PF) measurements Starting inrush current 5A-65A (peak) Digital transmissions protected by infrared communication interface Ac or battery powered Numerous functions: current range switching, HOLD, filtering, starting current, etc. Excellent readability: 3 measurements displayed simultaneously with a digit height of 14 mm The PX 120 is designed for use in colleges, universities, installation and industrial maintenance departments. It measures active and reactive power on single phase and three phase 3-wire balanced power systems. Even though the PX wattmeters measure many ac parameters, they are simple to operate. In addition to the main ac measurements, it has INRUSH functions for loads which draw large amounts of current at switch on and an averaging function, extremely useful with unstable measurement conditions. It is has a clear 14mm high, 999-count display capacity (4 digits) on three lines, with simultaneous display of three values: voltage, current and active power or reactive and apparent power. A special feature of this new wattmeter is its infrared transmission mode. The link is established using a magnetized optical head simply positioned on the front panel of the unit ensuring true electrical isolation of its interfaces. "Wattcom" data processing software is available as an option for data transfer, display of the quantities and screen printouts. More spec: Watt resolution: 0.1W - 1W depending range Volt resolution: 0.1V 1Mohm input Amps resolution: 1mA to 10mA depending range Temperature range: 0-50°C Battery: 6 x 1.5V batteries 40 hours AC power: 120V/230Vac powered Size: 60 x 108 x 211mm Weight: 0.835kg IEC61010 safety: 600V, Cat III, polution level 1 Warranty 1 year Ordering PX110 DC/AC single phase balanced wattmeter PX120 DC/AC three phase balanced wattmeter Includes: 2 voltage cable (red & black), 2 x 20A current cables, 2 test probes (red & black), 6 batteries, certificate of conformity, user manual and 1 year warranty Options: HX0012 Multi ratio current transformer 10-15-30A HX0013 Data acquisition & processing software inc CD and RS232 optical cable HX0021 120V or 230Vac Power Supply
PA106A rear panel PA106A data sheet
Single phase and three phase power analysing wattmeters allow simultaneous capture of many electrical measurements during testing. Using one set of V and A connections, an impressive list of measurements can be saved in seconds. Three phase power analysing wattmeters are important when accurate watts measurement is necessary for certification and traceability. In addition to active power (watts), reactive power (VAr), apparent power (VA), voltage rms (Vrms), current rms (Arms), power factor (PF), can all be viewed at the same time. All Powertek wattmeters simply connect between the ac supply and the load, various current probes and shunt options allow measurement with all levels of current amplitude. Typical three phase wattmeter applications include appliance testing like standby power compliance (Energystar), motors, generators, electric stoves, heating, air conditioning, pumps, fans, electronic lighting and variable frequency motor controllers . All our power analysers are equipped with safety terminals (4mm/banana) along with optional "breakout" boxes and clamp probes for fast and safe measurement. PA106A-1/0.1 Single Phase Power Analyser, 0.1% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input. PA106A-1/nh Single Phase Power Analyser, without harmonics, without graphics, 0.1% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input. PA106A-3/0.1 Three Phase Power Analyser, 0.1% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input. PA106A-3/nh Three Phase Power Analyser, without harmonics, without graphics, 0.1% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input.